skip to Main Content

RENQUIP Product Range

RENQUIP Brand

With inhouse Engineering capability, RenQuip is able to provide a reactive and fast turnaround of application specific modifications or bespoke “Engineered to order” solutions to any industry.

These OEM products and services are available, in addition to a wide range of leading brand, high quality tools, equipment and associated consumables to hire or buy direct from RenQuip or from our global network of distributors.

RENQUIP

RenQuip is the Original Equipment Manufacturer (OEM) for a range of “Made in Britain” Hydraulic & Mechanical flange working tools.

RENQUIP Product Range

AT4K

AT4K Hydraulic Flange Alignment Tool

The AT4K is a mechanical flange alignment tool that is used to correct:

  • Linear misalignment (when the axis of the two flanges are not aligned)
  • Rotational misalignment (when the axis of the flanges are aligned but the boltholes are not)
AT9K

AT9K Hydraulic Flange Alignment Tool

The AT9K is a Hydraulic flange alignment tool designed for medium and large flanges that is used to correct:

  • Linear misalignment (when the axis of the two flanges are not aligned)
  • Rotational misalignment (when the axis of the flanges are aligned but the bolt holes are not)

The AT9K can produce a maximum reaction alignment force of 90kN when the maximum hydraulic pressure of 10,000psi (700Bar) is applied to the tool.

FSW17D Flange Spreading Wedge Twin Tool Kit

A set of 2 Hydraulic Flange Spreading Wedges actuated by 700bar hydraulics. The FSW17 flange spreading wedge can enter a flange joint access gap as little as 6mm and produce a maximum force of 326kN when used in pairs (as recommended) to push the mating faces of flanges apart. The FSW17 can create a gap up to 81mm between flange faces with the stepped blocks fitted facilitating the replacement of gaskets, seal ring’s, or other flange face maintenance and testing.

  • 100% Load/Pressure tested and certified
  • High durability High Quality low Maintenance design •
  • Tool weight 7Kg
  • Max Spreading force 163kN (326kN when used in pairs)
  • Spreading distance 6mm to 81mm (when used with stepped blocks)
  • Robust Moulded Case for easy transportation and storage
FSW17K

FSW17K Flange Spreading Wedge

A Hydraulic Flange Spreading Wedge actuated by 700bar hydraulics.

The FSW17 flange spreading wedge can enter a flange joint access gap as small as 6mm and produce a maximum force of 326kN when used in pairs (as recommended) to push the mating faces of flanges apart. 17 can create a gap up to 81mm between flange faces with the stepped blocks fitted facilitating the replacement of gaskets, seal ring’s, or other flange face maintenance and testing.

  • 100% Load/Pressure tested and certified
  • High durability High Quality low Maintenance design •
  • Tool weight 7Kg
  • Max Spreading force 163kN (326kN when used in pairs)
  • Spreading distance 6mm to 81mm (when used with stepped blocks)
  • Robust Moulded Case for easy transportation and storage
FSW17M

FSW17M Flange Spreading Wedge Twin Tool and Pump Kit

A full set of 2 Hydraulic Flange Spreading Wedges with a hydraulic hand pump, hoses and accessories.

The FSW17 flange spreading wedge can enter a flange joint access gap as little as 6mm and produce a maximum force of 326kN when used in pairs (as recommended) to push the mating faces of flanges apart. 17 can create a gap up to 81mm between flange faces with the stepped blocks fitted facilitating the replacement of gaskets, seal ring’s, or other flange face maintenance and testing. It is strongly recommended that a minimum of 2 flange spreading wedges are used when spreading a flange joint. The flange spreading wedges should be positioned at opposite sides of the flange joint and actuated as necessary to maintain a parallel joint gap.

  • 100% Load/Pressure tested and certified
  • High durability High Quality low Maintenance design •
  • Tool weight 7Kg
  • Max Spreading force 163kN (326kN when used in pairs)
  • Spreading distance 6mm to 81mm (when used with stepped blocks)
  • Robust Moulded Case for easy transportation and storage
FSW17M

FSW17M Flange Spreading Wedge Twin Tool and Pump Kit

A full set of 2 Hydraulic Flange Spreading Wedges with a hydraulic hand pump, hoses and accessories.

The FSW17 flange spreading wedge can enter a flange joint access gap as little as 6mm and produce a maximum force of 326kN when used in pairs (as recommended) to push the mating faces of flanges apart. 17 can create a gap up to 81mm between flange faces with the stepped blocks fitted facilitating the replacement of gaskets, seal ring’s, or other flange face maintenance and testing. It is strongly recommended that a minimum of 2 flange spreading wedges are used when spreading a flange joint. The flange spreading wedges should be positioned at opposite sides of the flange joint and actuated as necessary to maintain a parallel joint gap.

  • 100% Load/Pressure tested and certified
  • High durability High Quality low Maintenance design •
  • Tool weight 7Kg
  • Max Spreading force 163kN (326kN when used in pairs)
  • Spreading distance 6mm to 81mm (when used with stepped blocks)
  • Robust Moulded Case for easy transportation and storage

FSW17P Flange Spreading Wedge

A Hydraulic Flange Spreading Wedge with a combined hydraulic cylinder and pump unit.

The FSW17P flange spreading wedge can enter a flange joint access gap as small as 6mm and produce a maximum force of 326kN when used in pairs (as recommended) to push the mating faces of flanges apart. 17P can create a gap up to 81mm between flange faces with the stepped blocks fitted facilitating the replacement of gaskets, seal ring’s, or other flange face maintenance and testing.

  • 100% Load/Pressure tested and certified
  • High durability High Quality low Maintenance design •
  • Tool weight 8,5Kg
  • Max Spreading force 163kN (326kN when used in pairs)
  • Spreading distance 6mm to 81mm (when used with stepped blocks)
  • Robust Moulded Case for easy transportation and storage

PH300S, PH580S and PH1100S Sealed Hydraulic Hand Pumps

A sealed hydraulic hand pump that is used to provide up to 10,000psi / 700Bar of hydraulic pressure to single acting hydraulic systems.

The PH pump range are equipped with a flexible reservoir that contracts when oil is pumped from the reservoir into the system – this removes the requirement for an air vent and eliminates the possibility of accidental oil spillage from the reservoir.

The flexible reservoir enables the pump to be used in any orientation without the risk of air entering the hydraulic system. It also prevents contamination or debris entering the hydraulic system from the atmosphere.

  • Max Pressure 10,000psi 700bar.
  • High durability High Quality low Maintenance design.
  • 100% Pressure tested and certified. •
  • 2 speed design for faster operation and lower handle force
  • Light weight for easy handling

PH300T, PH580T and PH1100T Sealed Hydraulic Hand Pumps

The sealed hydraulic hand pumps that are used to provide up to 10,00psi / 700Bar of hydraulic pressure to single acting hydraulic systems.

The PH300T, PH580T and PH1100T pumps are equipped with two outlet ports with individual control valves, this enables the operator to control two hydraulic systems independently or synchronized if both vales are left open.

  • Max Pressure 10,000psi 700bar
  • High durability High Quality low Maintenance design.
  • 100% Pressure tested and Light weight for easy handling.
  • Two speed design for faster operation and lower handle force.

WJ19K Hydraulic Lifting Wedge Jack

A Hydraulic Lifting Wedge Jack actuated by 700 bar hydraulics

The WJ19K lifting wedge jack can enter an access gap as small as 9.5mm and produce a maximum lifting force of 183kN up to a height of 67.5mm when 700 bar of hydraulic pressure is applied. Multiple tools can be linked together to produce greater lifting forces.

The WJ19K tools can be used in any orientation making them suitable for lifting, pushing and spreading applications.

  • High durability High Quality low Maintenance design
  • Tool weight 8.5Kg
  • Max Lifting force 183kN
  • Lifting distance 9.5mm to 67.5mm when used with stepped block
  • Robust Moulded Case for easy transportation and storage

WJ19P Hydraulic Lifting Wedge Jack

A Hydraulic Lifting Wedge Jack actuated by 700 bar hydraulics

The WJ19P lifting wedge jack can enter an access gap as small as 9.5mm and produce a maximum lifting force of 183kN up to a height of 67.5mm when fully actuated.

The WJ19P tools can be used in any orientation making them suitable for lifting, pushing and spreading applications.

  • High durability High Quality low Maintenance design
  • Tool weight 8.5Kg
  • Max Lifting force 183kN
  • Lifting distance 9.5mm to 67.5mm when used with stepped block
  • Robust Moulded Case for easy transportation and storage

For Product Assistance or Enquiries on Availability, contact us here:

Full Website